Piper PA-32-300 N31407 accident near Oklahoma City, Oklahoma

Probable cause

The loss of aircraft control due to the failure of the stabilator control cable turnbuckle.

NTSB analysis

The airplane nosed over shortly after takeoff and impacted the runway. The nose landing gear collapsed and the airplane sustained substantial damage to the firewall. A postaccident examination revealed that a stabilator control cable had failed at a turnbuckle as a result of stress corrosion cracking, which compromised the pilot's ability to control the pitch attitude of the airplane. The airplane was within the maintenance inspection requirements at the time of the accident, with the most recent annual inspection being completed about 1 year prior to the accident. The airplane service manual included a special control cable fitting inspection for airplanes in service 15 years or more. Any evidence of corrosion or cracking was cause for replacement according to the service manual. The accident pilot had owned the airplane for about 26 years. During the time he owned the airplane, the control cables had not been replaced. The investigation could not determine when the stress corrosion cracking commenced on the turnbuckle.

Text from the NTSB. Open the NTSB docket for CEN11LA275 for the full record.