Cessna 421B N799TF accident near Sedona, Arizona

Preliminary information

On March 27, 2026, about 1630 Pacific daylight time, a Cessna 421B, N799TF, was substantially damaged when it was involved in an accident near Sedona, Arizona. The pilot and pilot rated passenger were not injured. The airplane was operated as a Code of Federal Regulations Part 91 personal flight.

According to the pilot, the preflight checks, flight from Los Alamos Airport (LAM), Los Alamos, New Mexico, and approach to landing at Sedona Airport (SEZ), Sedona, Arizona, were uneventful. During the pre-landing checks, the pilot observed three green lights, indicating that all three landing gear legs were locked in the down position. After touchdown on runway 21 the airplane began to yaw to the right and progressed to a “heavy pull.” The pilot applied full left rudder to counteract the right yaw, and the airplane remained on centerline, initially. As the airplane slowed during the landing roll, the right yaw resumed and the left rudder correction became ineffective. Subsequently, the airplane exited the right side of the runway and impacted two taxiway signs. All three landing gear collapsed, and the airplane continued through a ditch before it came to rest upright in a grassy area adjacent to the runway.

Postaccident examination of the airplane revealed that the right wing, left horizontal stabilizer, and fuselage were substantially damaged.

The wreckage was retained for further examination.

Text from the NTSB; a preliminary report can change and names no cause. Open the NTSB docket for WPR26LA145 for the full record.