Diamond Aircraft Industries DA-40 N196DC accident near Lakeview, Oregon

May 11, 2008 · NTSB number SEA08CA131 · Final report

Probable cause

The pilot's inadequate compensation for the wind conditions and failure to maintain directional control. Contributing to the accident was the crosswind was a factor.

NTSB analysis

The pilot was approaching his destination and listened to the automated weather observation system (AWOS) which indicated winds were from 230 degrees at 10 knots. The pilot landed on runway 16 and during the landing, the right wing lifted, and the airplane veered to the left of the runway into a field. As the airplane rolled through the field, the left main landing gear separated and the left wing impacted the ground, resulting in substantial damage. The airplane came to rest in a ditch. Following the accident, the pilot said that the wind was gusting. In his statement, the pilot noted that the airport guide indicates that pilots are authorized to land on the taxiway which runs northeast/southwest during crosswind conditions. The pilot felt that the 10-knot velocity of the wind did not warrant landing on the taxiway. The pilot did not report any mechanical malfunctions.

Text from the NTSB. Open the NTSB docket for SEA08CA131 for the full record.

Event

Date
May 11, 2008
Type
Accident
Place
Lakeview, Oregon
Nearest airport
Lake County Airport (LKV)
Highest injury
None
Weather
Visual (VMC)
Light
Day

Diamond Aircraft Industries DA-40

N-number
N196DC
Category
Airplane
Damage
Substantial
Operating rule
Part 91 (general aviation)
Purpose of flight
Personal

From the NTSB aviation accident database: N-registered aircraft, events since 2008, data through Oct 28, 2026. The file is published monthly, so the latest weeks are incomplete and recent records can change. The official source is the NTSB aviation investigation search. CheckAero is independent and not affiliated with the NTSB.