Cessna 421B N60HG accident near Alpine, Texas

Probable cause

The loss of engine power due to disengagement of the magneto idler gear support pin.

NTSB analysis

Shortly after departure, when the airplane was about 400 feet in the air, the right engine stopped producing power. The pilot conducted a forced landing in a nearby field. An on-site inspection revealed that the airplane fuel tanks contained plenty of fuel. A post accident examination of the engines was conducted. An engine monitor was downloaded; a sudden decrease in cylinder head (CHT) and exhaust gas (EGT) temperature readings were observed for the right engine. A visual inspection of the engine revealed that the idler gear support pin, located on the rear of the engine, had backed out. The idler pin's retaining hardware (two nuts and lock-washers) were missing. The idler pin's movement allowed the idler gear to drop and become disconnected from the magnetos drive gear, resulting in a loss of engine ignition. Additionally, due to the mis-located idler gear, the accessory drive gears on the cam and crankshafts were either ground down or broken. Disassembly of the engine, found numerous metal pieces in the engine's oil sump.

Text from the NTSB. Open the NTSB docket for CEN09LA284 for the full record.