Piper PA 46-350P N987PS accident near Clovis, New Mexico

Probable cause

The pilot’s failure to follow the go-around procedures by prematurely retracting the flaps and not establishing a proper go-around climb speed after attempting to land with a quartering tailwind, resulting in the airplane’s inability to climb.

NTSB analysis

As the pilot approached the destination airport, the wind was reported as light and variable. He stated that as he flew the visual approach to runway 4 and prepared to land, he encountered a major gust of wind and elected to perform a go-around. The pilot reported that he applied full engine power, retracted the landing gear and flaps, and initiated a climb when the “stall shaker started shaking”. The pilot lowered the nose to prevent the airplane from stalling and initiated a gear-up landing to an open field adjacent to the runway.

The pilot reported encountering a gust of wind; however, the wind reported at the airport 4 minutes before the accident was from 180 ° at 11 knots. The wind reported about an hour after the accident was from 160° at 10 knots. Neither weather report indicated wind gusts or significant changes in wind direction. The calculated crosswind component at the time of the accident was about 7 knots, with a tailwind of about 8 knots.

Postaccident examination of the airplane revealed no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Given the pilot’s description of the go-around and the absence of a mechanical failure or malfunction, he likely retracted the flaps before establishing the required climb airspeed and positive rate of climb. The quartering tailwind would have contributed to the loss of expected airplane performance, resulting in an incipient stall and the subsequent gear-up landing.

Text from the NTSB. Open the NTSB docket for WPR23LA002 for the full record.