Cessna 180J N7770K accident near Buffalo, Wyoming

Probable cause

The pilot’s failure to maintain directional control during the takeoff roll, which resulted in a ground loop and collision with terrain.

NTSB analysis

The pilot of the tailwheel-equipped airplane reported that, about 300 ft into the takeoff roll, the tail wheel came off the ground and the airplane immediately veer left towards a deep ravine. The pilot reduced power to idle and applied full right rudder and right aileron control, which returned the airplane to a runway heading, but the airplane was now on the left side of the runway. About 900 ft into the takeoff roll the airplane then rapidly turned right and crossed the runway at a 30° angle. The pilot applied full left rudder and left aileron control to counteract the turn, but the airplane departed the runway edge and ground looped to the right substantially damaging the left wing and left horizontal stabilizer. The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Text from the NTSB. Open the NTSB docket for WPR21LA327 for the full record.