Cessna R172 N736TB accident near Ogden, Utah

Jan 24, 2019 · NTSB number WPR19CA072 · Final report

Probable cause

The student pilot's failure to maintain the runway heading during a touch-and-go landing and the flight instructor's delayed remedial action, which resulted in the airplane departing the left side of the runway, impacting snow, and nosing over.

NTSB analysis

The student pilot and flight instructor reported that, after conducting maneuvers, they proceeded to the airport to practice touch-and-go takeoffs and landings. The student landed the airplane off the runway centerline and then raised the flaps and added power. The airplane continued forward and impacted snow along the edge of the runway, nosed over, and then came to rest inverted. The airplane sustained substantial damage to the right wing and vertical stabilizer. The instructor and student reported that there were no preaccident mechanical malfunctions or failures with the airframe or engine that would have precluded normal operation.

Text from the NTSB. Open the NTSB docket for WPR19CA072 for the full record.

Event

Date
Jan 24, 2019
Type
Accident
Place
Ogden, Utah
Nearest airport
Ogden-Hinckley Airport (OGD)
Highest injury
None
Weather
Visual (VMC)
Light
Day

Cessna R172

N-number
N736TB
Category
Airplane
Year built
1977
Damage
Substantial
Operating rule
Part 91 (general aviation)
Purpose of flight
Instructional

From the NTSB aviation accident database: N-registered aircraft, events since 2008, data through Oct 28, 2026. The file is published monthly, so the latest weeks are incomplete and recent records can change. The official source is the NTSB aviation investigation search. CheckAero is independent and not affiliated with the NTSB.