Piper PA60 602P N35FD accident near Sandpoint, Idaho

Probable cause

The pilot's failure to fly the approach at the appropriate landing speed and attain the correct touchdown point, which resulted in a runway overrun.

NTSB analysis

The pilot reported that, while on a right base leg visual approach, he received the current automated weather report and that he did not think that the 4-knot tailwind was an issue because the runway was 5,500 feet long. The pilot reported that, although the airplane landed long, he thought that he had sufficient runway to stop the airplane with heavy braking. However, as he applied the brakes, he felt the sensation of "no brakes" as the end of the runway quickly approached. The airplane's owner, who occupied a seat in the rear cabin, reported that the pilot seemed to be having a problem aligning the airplane with the runway during the approach, that the airplane was high and fast and the flaps were full down, and that the pilot was trying to force the airplane down onto the runway. The passenger reported that he observed that the approach speed was 132 knots; per the airplane's flight manual, the calculated approach speed for the landing weight of the airplane was about 90 knots. The airplane subsequently ran off the end of the runway and impacted the localizer structure, which resulted in substantial damage to the airplane. A postaccident examination of the airplane's braking system revealed that the brakes were likely operating properly before the airplane exited the runway.

Text from the NTSB. Open the NTSB docket for WPR13LA419 for the full record.