Robinson Helicopter R22 BETA N54BA accident near Randle, Washington

Probable cause

The pilot exceeded the helicopter's performance, resulting in low rotor rpm and settling.

NTSB analysis

The certified flight instructor (CFI) was preparing the flying pilot for his commercial helicopter check flight. They were practicing pinnacle and confined-area landings to a small elevated U.S. Forest Service landing platform located along a 4,750-foot mean sea level (msl) ridgeline. The helicopter performance tables indicated a maximum out-of-ground-effect hover altitude of 6,000 feet msl, based on helicopter weight and environmental conditions. The pilot made a very shallow approach to the landing platform and established a hover. At this time, the engine manifold pressure increased, and the low rotor rpm horn sounded. The helicopter settled onto the landing platform, and the flying pilot said to the CFI that the landing skid on his side was not on the platform. He maneuvered the helicopter forward off the platform and downslope. The low rotor rpm horn stopped sounding, and the helicopter increased its forward speed but did not increase its altitude. The right skid caught some snow, and the helicopter flipped over. The helicopter came to rest facing uphill on its left side with damage to the tailboom and main rotor blades. The CFI stated that the helicopter had no mechanical malfunctions or failures during the flight.

Text from the NTSB. Open the NTSB docket for WPR12CA117 for the full record.