Cessna 175 N9247B accident near Huntsville, Utah

Jun 30, 2010 · NTSB number WPR10CA320 · Final report

Probable cause

The pilot's failure to maintain adequate clearance from terrain during climb.

NTSB analysis

The pilot stated that after takeoff he began a southbound climb until he felt that sufficient altitude had been gained to maintain terrain clearance followed by a turn to the north-northeast. He continued to climb as he followed a canyon reporting that he experienced light turbulence throughout the flight. As the pilot flew up the valley he elected to follow the northwestern side expecting to gain extra lift from the wind. The pilot reported that the airplane was climbing but as the valley narrowed, the airplane’s climb rate decreased and then the airplane began to descend. The pilot began to shift to the other side of the valley, which only increased the rate of descent. As the pilot attempted to maintain altitude, the airspeed began to decrease. As the airspeed continued to decrease the pilot verified that full power was still being applied. The stall warning horn periodically activated as the pilot attempted to avoid trees. The airplane collided with a tree and nosed over as the airplane impacted terrain resulting in substantial damage.

Text from the NTSB. Open the NTSB docket for WPR10CA320 for the full record.

Event

Date
Jun 30, 2010
Type
Accident
Place
Huntsville, Utah
Highest injury
None
Weather
Visual (VMC)
Light
Day

Cessna 175

N-number
N9247B
Category
Airplane
Damage
Substantial
Operating rule
Part 91 (general aviation)
Purpose of flight
Personal

From the NTSB aviation accident database: N-registered aircraft, events since 2008, data through Oct 28, 2026. The file is published monthly, so the latest weeks are incomplete and recent records can change. The official source is the NTSB aviation investigation search. CheckAero is independent and not affiliated with the NTSB.