Travel Air 4000 N3945 and Cessna P206A N4638F accident near Hollister, California

Probable cause

The failure of the pilot of the other airplane to maintain physical clearance while taxiing.

The pilot's failure to maintain physical clearance from the other airplane while taxiing.

NTSB analysis

A Travel Air 4000 collided with a Cessna P206A on the ground at a non-towered municipal airport. The Travel Air was taxiing in after landing on runway 31, and the Cessna P206A was standing with its engine operating on the ramp. According to the pilot of the Travel Air, he taxied off of runway 31 onto taxiway B. As he taxied toward the airport parking ramp, he started a clearing "S" turn and observed the Cessna P206A directly in front of him. He turned hard to the left, but the outer 2 feet of the Travel Air's lower right wing passed through the propeller arc of the Cessna. A piece of the Travel Air's lower right wing was cut off.

A Travel Air 4000 collided with a Cessna P206A on the ground at a non-towered municipal airport. The Travel Air was taxiing in after landing on runway 31, and the Cessna P206A was standing with its engine operating on the ramp. According to the pilot of the Travel Air, he taxied off of runway 31 onto taxiway B at the non-towered airport. As he taxied toward the airport parking ramp, he started a clearing "S" turn and observed the Cessna P206A directly in front of him. He turned hard to the left, but the outer 2 feet of the Travel Air's lower right wing passed through the propeller arc of the Cessna. A piece of the Travel Air's lower right wing was cut off.

Text from the NTSB. Open the NTSB docket for LAX08LA146 for the full record.