Amateur-built MAGNI M24 N3PW accident near La Grange, Texas

Probable cause

The pilot’s failure to maintain lateral control while taxiing onto the runway in gusting wind conditions.

NTSB analysis

The gyroplane pilot reported that, during taxi to the runway for takeoff, he began the pre-rotation of the rotor. As he turned the gyroplane to the right onto the runway, a "strong gust" of wind tilted the gyroplane to the left, and the rotor struck the ground. Subsequently, the gyroplane came to rest on its left side.

The gyroplane sustained substantial damage to the tailboom.

The pilot reported that there were no preaccident mechanical failures or malfunctions with the gyroplane that would have precluded normal operation.

A review of recorded data from the automated weather observation station located on the airport reported that, about 5 minutes before the accident, the wind was from 320° at 17 knots, gusting 26 knots. The gyroplane was departing runway 34.

Text from the NTSB. Open the NTSB docket for GAA18CA217 for the full record.