Aeronca 7BCM N1316V accident near Reidsville, North Carolina

Dec 13, 2015 · NTSB number GAA16CA082 · Final report

Probable cause

The pilot's loss of pitch control while maneuvering at low altitude, which resulted in a collision with terrain, a left main landing gear collapse, and runway excursion.

NTSB analysis

The pilot reported that he was participating in an ash spreading ceremony and planned to do a low pass over the runway. As the airplane approached 50 feet above ground level and 70 knots, the pilot reported that the bag containing the ashes began to break and he "momentarily" let go of the flight controls. Subsequently, the airplane descended, impacted the runway, and bounced back into the air. During the bounce, the pilot regained control and landed straight ahead, but the left main landing gear collapsed on the touchdown. The airplane veered off the runway to the left and skidded to a stop. A postaccident examination of the airframe revealed substantial damage to the firewall.

The pilot reported that there were no mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Text from the NTSB. Open the NTSB docket for GAA16CA082 for the full record.

Event

Date
Dec 13, 2015
Type
Accident
Place
Reidsville, North Carolina
Nearest airport
Rockingham County Nc Shiloh (SIF)
Highest injury
None
Weather
Visual (VMC)
Light
Day

Aeronca 7BCM

N-number
N1316V
Category
Airplane
Year built
1947
Damage
Substantial
Operating rule
Part 91 (general aviation)
Purpose of flight
ADRP

From the NTSB aviation accident database: N-registered aircraft, events since 2008, data through Oct 28, 2026. The file is published monthly, so the latest weeks are incomplete and recent records can change. The official source is the NTSB aviation investigation search. CheckAero is independent and not affiliated with the NTSB.