Cessna T210L N1650X accident near Duluth, Minnesota

Probable cause

The pilot's failure to extend the landing gear prior to landing, which resulted in substantial damage to the fuselage during landing. Contributing to the accident was the pilot's diverted attention to another airplane in the vicinity and that he inaccurately perceived the gear warning horn annunciator as the TCAS annunciator.

NTSB analysis

The pilot reported that he began his descent in the airport traffic pattern when another airplane announced its position in the vicinity of the airport. The pilot turned his attention to the traffic and located it visually. The traffic collision avoidance system (TCAS) annunciated in the proximity of the other airplane. The turn to the base leg was made after passing the traffic. During the base and final legs, the gear warning horn annunciated and the pilot stated he had mistaken it for the TCAS. The pilot landed with the gear retracted and the airplane sustained substantial damage to fuselage supporting structure.

The pilot reported he was wearing noise cancelling headphones during the flight but did state he was able to hear the gear warning horn annunciate.

After the accident, the airplane was placed on jacks and the landing gear was extended using the airplane's own systems and there was no indication of abnormal operation.

The pilot reported no preimpact mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation.

Text from the NTSB. Open the NTSB docket for GAA15CA206 for the full record.