Rolladen-Schneider LS-4 N465CB accident near Jasper, Tennessee

Mar 15, 2010 · NTSB number ERA10CA176 · Final report

Probable cause

The inadequate in-flight planning by the glider pilot to intentionally cross a ridge at low altitude, resulting in the in-flight collision with trees.

NTSB analysis

The glider pilot stated that he intended on attempting the Federation Aeronautique Internationale (FAI) gold badge distance of 300 kilometers (186.42-mile) cross-country flight. He also stated that he felt pressure to fly first. The glider was towed aloft to 2,000 feet mean sea level, and released. He flew to the north side of a ridge and found lift, then flew south toward the airport in an effort to stay closer to it, intending on finding lift before proceeding. While approaching the ridge he encountered sink, and elected to cross the ridge. He crossed the ridge at approximately 300 feet above ground level and he could see the airport, but was unable to reach it. He maneuvered the glider for a landing into trees along the ridge. There was no preimpact mechanical failure or malfunction with the glider. The pilot later stated he should have landed in fields in the valley.

Text from the NTSB. Open the NTSB docket for ERA10CA176 for the full record.

Event

Date
Mar 15, 2010
Type
Accident
Place
Jasper, Tennessee
Nearest airport
Marion County Airport (APT)
Highest injury
None
Weather
Visual (VMC)
Light
Day

Rolladen-Schneider LS-4

N-number
N465CB
Category
Glider
Damage
Substantial
Operating rule
Part 91 (general aviation)
Purpose of flight
Personal

From the NTSB aviation accident database: N-registered aircraft, events since 2008, data through Oct 28, 2026. The file is published monthly, so the latest weeks are incomplete and recent records can change. The official source is the NTSB aviation investigation search. CheckAero is independent and not affiliated with the NTSB.