Probable cause
the rupture of the nose landing gear hydraulic line that resulted from abrasions due to contact with the nose landing gear tire. Contributing to the incident was the incorrect installation of union and restrictor on the actuator.
NTSB analysis
The aircraft experienced a structural failure of the nose landing gear (NLG) actuator retract beam when the landing gear was selected down during approach. The flight crew heard a loud noise during gear actuation, performed a go-around, and then returned to land uneventfully. Examination of the aircraft revealed a fracture across the horizontal leg of the actuator retract beam that propagated into the radius of the vertical leg. The fracture surface features were consistent with overstress failure with no sign of fatigue. The NLG hydraulic line to the actuator was found ruptured with abrasion damage aligned coincident with the NLG tire.
Disassembly of the actuator revealed the restrictor fitting was installed in the head end of the actuator and the union fitting was installed on the rod end cap although engineering documentation requires the restrictor fitting to be installed in the rod end cap and the union fitting to be installed in the head end. The union and restrictor are normally placed in the actuator prior to installing the actuator on the airplane.
Hydraulic fluid leaking from the actuator through the ruptured line allowed air to fill the actuator cavity on the head end of the actuator while hydraulic system pressure remained on the rod end. When the landing gear was selected down, air in the actuator allowed the actuator piston to move rapidly toward the head end. Due to the union rather than the restrictor being installed on the piston end, higher than normal hydraulic flow was permitted in the rod end of the actuator increasing the rate of piston movement. When the piston reached the end of range of motion, the resulting force was transferred to the NLG retract actuator beam.
Text from the NTSB. Open the NTSB docket for DCA12IA113 for the full record.
Event
- Date
- Jul 27, 2012
- Type
- Incident
- Place
- El Paso, Texas
- Nearest airport
- El Paso International Airport (KELP)
- Highest injury
- None
- Weather
- Visual (VMC)
- Light
- Day
Boeing 737-3H4
- N-number
- N379SW
- Category
- Airplane
- Damage
- Minor
- Operating rule
- Part 121 (airline)
From the NTSB aviation accident database: N-registered aircraft, events since 2008, data through Oct 28, 2026. The file is published monthly, so the latest weeks are incomplete and recent records can change. The official source is the NTSB aviation investigation search. CheckAero is independent and not affiliated with the NTSB.