Cessna A185f N4742E accident near Grand Junction, Colorado

May 16, 2023 · NTSB number CEN23LA189 · Final report

Probable cause

The pilot’s failure to maintain directional control during the landing roll with gusting wind.

NTSB analysis

The pilot reported that, while performing a 3-point landing, a wind gust from the right caused the airplane to “balloon” and bounce during the initial touchdown. During the attempted bounce recovery, the tundra tires firmly grabbed the grooved runway resulting in a ground loop. During the ground loop, the left wing struck the ground which resulted in substantial damage to the wing. The pilot reported that there were no preaccident malfunctions or failures with the airplane which would have precluded normal operation. At the time of the accident, the pilot was landing the airplane on runway 29 with wind from 330° at 7 knots gusting to 17 knots.

The pilot stated that he was unfamiliar flying this airplane with large tundra tires.

Text from the NTSB. Open the NTSB docket for CEN23LA189 for the full record.

Event

Date
May 16, 2023
Type
Accident
Place
Grand Junction, Colorado
Nearest airport
Grand Junction Regional Airpor (GJT)
Highest injury
None
Weather
Visual (VMC)
Light
Day

Cessna A185f

N-number
N4742E
Category
Airplane
Year built
1979
Damage
Substantial
Operating rule
Part 91 (general aviation)
Purpose of flight
Personal

Other records under this N-number

From the NTSB aviation accident database: N-registered aircraft, events since 2008, data through Oct 28, 2026. The file is published monthly, so the latest weeks are incomplete and recent records can change. The official source is the NTSB aviation investigation search. CheckAero is independent and not affiliated with the NTSB.