Cessna 172H N3238L accident near Crosby, Texas

Probable cause

The pilot’s delayed soft-field takeoff procedure, which prevented the pilot from achieving adequate airspeed and a proper climb rate resulting in a collision with a moving train.

NTSB analysis

The pilot was performing a soft-field takeoff from a 2,700 ft soft, dry grass runway. According to the pilot, during the takeoff roll the soft terrain seemed to impede his airspeed, so he decided to perform a soft-field takeoff in ground effect. About half the distance down the airstrip, the pilot considered aborting the takeoff because he was concerned the airplane was not gaining enough airspeed to climb and avoid a moving train that was on the railroad track. He ultimately did not abort the takeoff, as he thought he would not be able to stop in time to avoid a collision with the train. As the airplane neared the moving train, the pilot pulled up the control yoke to initiate a climb; however, the airplane’s right main landing gear contacted the moving train. The airplane nosed down, impacted terrain, and came to rest inverted. The airplane sustained substantial damage to the fuselage and wings. A pilot-rated witness stated that it did not appear the airplane reached proper airspeed during the takeoff.

Postaccident examination revealed no evidence of mechanical malfunctions or failures that would have precluded normal operation.

Based on the airplane’s weight and the ambient conditions, the manufacturer’s predicted takeoff distance to clear a 50 ft obstacle was about 1,200 ft. It is likely the pilot’s delayed decision to perform a soft-field takeoff procedure resulted in the airplane not adequately accelerating to a proper airspeed and climb rate.

Text from the NTSB. Open the NTSB docket for CEN23LA108 for the full record.