Amateur-built N1557S accident near River Falls, Wisconsin

Probable cause

The pilot’s improper fuel planning, which resulted in a total loss of engine power due to fuel exhaustion.

NTSB analysis

The pilot completed the preflight inspection with no issues noted; the airplane had about 10.3 gallons of fuel onboard for the local flight test. The airplane departed and, after flying for between 30 and 45 minutes, the pilot decided to return to the airport. Shortly thereafter, the engine sustained a total loss of power. The pilot reported that the engine did not emit any noises, nor did he notice a drop in the engine’s rpm. The pilot tried restarting the engine three times. Although the engine would “turn over,” it would not start. The pilot elected to perform a forced landing to a corn field. During the landing, the right wing impacted a traffic sign and the airplane came to rest upright in a grass ditch. The airplane sustained substantial damage to the right wing and the fuselage.

The on-site examination of the airplane found no fuel inside of the fuel tank; the fuel tank was not compromised. There were no signs of a fuel leak on the airframe or from the engine, nor were there any signs of a fuel leak or spillage on the ground at the accident site.

During a postaccident examination, the fuel line to the carburetor was removed and no fuel was observed. No fuel was observed from the fuel supply line to the strainer. The bowl from the strainer was removed and no fuel was found. There were no preimpact mechanical malfunctions or failures with the airframe or the engine that would have precluded normal operation.

Based on the available evidence, it is likely that the engine lost power due to fuel exhaustion.

Text from the NTSB. Open the NTSB docket for CEN22LA353 for the full record.