Rockwell 112 N1013J accident near Tomball, Texas

Probable cause

The pilot did not maintain control of the airplane during the landing and subsequent go around.

NTSB analysis

The pilot reported that, while attempting to land on runway 17R, the airplane encountered a crosswind and began “crabbing to the right.” He applied full power to go around, and the airplane lifted off, but it was then “pushed,” and right main landing gear (MLG) impacted a sign. The left wing then hit the runway, followed by the left MLG and nosewheel. The airplane sustained substantial damage to both wing spars and the left aileron. The pilot reported that there were no preaccident mechanical malfunctions or failures with the airplane that would have precluded normal operation. The recorded wind at the time of the accident was from 080° at 9 knots. The pilot estimated that the wind gusted to 22 knots; there were no wind gusts recorded around the time of the accident.

Text from the NTSB. Open the NTSB docket for CEN20CA299 for the full record.