Globe GC 1A N90365 accident near Los Lunas, New Mexico

Probable cause

The loss of directional control during takeoff and impact with a steel culvert.

NTSB analysis

The airplane arrived to the airport as a refuel stop the day before the accident. During the landing, the airplane ground looped and sustained unknown damage to the airplane. Over the course of that day and the day of the accident, the pilot, who was also a mechanic, completed repairs to the airplane with the assistance from persons at the airport. A portion of the repairs included welding to the right main landing gear link assemblies, and any additional repairs to the airplane were unknown. During takeoff the day following the ground loop, the airplane veered to the left of the runway and struck a berm. The airplane became airborne and then impacted a steel culvert structure adjacent to the runway. The pilot died of his injuries 17 days after the accident. Persons who spoke to the pilot before and after the accident reported the pilot had minimal flying experience in recent years in the accident airplane. The pilot stated during his hospital stay after the accident that there were no mechanical issues during the accident takeoff.

Text from the NTSB. Open the NTSB docket for CEN18LA012 for the full record.