Cessna 172M N1820V accident near Thief River Falls, Minnesota

Probable cause

The pilot’s failure to maintain clearance from the power line while on approach to landing.

NTSB analysis

During the local flight, the pilot noted that the air was getting a little choppy and that he had to increase the wind correction angle in order to fly a normal heading. The pilot flew a normal downwind approach to the airstrip, but the wind correction angle was very large. He aborted the landing and did a full-power climb to a safe altitude. He said that he then elected to land on the east-west blacktop road right in front of the farm rather than the airstrip, which ran north-south. He circled due to traffic on the road and was concentrating on possible traffic as he approached to land. Soon thereafter, the pilot saw wires directly ahead, and he heard the airplane strike a wire; he applied full power, but the airplane descended and impacted a ditch on the right side and nosed over. The airplane sustained substantial wing damage during the nose over. The pilot reported that there were no mechanical malfunctions with the airplane that would have precluded normal operation.

Text from the NTSB. Open the NTSB docket for CEN13CA272 for the full record.