Cessna 207A N17GN accident near Kongiganak, Alaska

Probable cause

The pilot's decision to attempt to takeoff on a short, wet runway with a heavily loaded airplane, and his failure to abort the takeoff before it became impracticable.

NTSB analysis

The pilot was attempting to takeoff from a short, wet runway with five passengers, and baggage when the accident occurred. He stated that the heavily loaded airplane didn't seem to accelerate as fast as it should have, and slowed down each time it encountered one of the numerous pools of water on the runway. He said the airplane became airborne about 3/4 down the runway, but would not climb. He realized the airplane was going to collide with the tundra, and added more flaps as the airplane passed over the end of the runway, and pulled back on the elevator control to minimize the impact. The pilot stated that he didn't think the engine was developing full power, although he had no problems with it during previous flights that day. He also noted that he was uncertain as to the actual weight of the airplane at takeoff, but said it was at or below the allowable gross weight. A review of the operator's maintenance records for the accident airplane disclosed no recent mechanical problems or pilot complaints about the engine's performance. An FAA inspector inspected the accident engine postaccident and monitored it during a test run at the operator's facilities. The inspector found no anomalies with the engine, and stated that it developed full rated rpm during the test run. A witness to the accident said the airplane appeared to be heavily loaded with bags and people, and that it slowed significantly each time it hit a puddle of water.

Text from the NTSB. Open the NTSB docket for ANC08LA111 for the full record.